Liên kết tài nguyên

Liên kết website

Thành viên trực tuyến

5 khách và 0 thành viên

Thống kê

  • truy cập   (chi tiết)
    trong hôm nay
  • lượt xem
    trong hôm nay
  • thành viên
  • Điều tra ý kiến

    Bạn nhận thấy trang web này như thế nào?
    Rất hay
    Đẹp
    Bình thường
    Không hay
    Ý kiến khác

    Chào mừng quý thầy cô và các bạn đến với website Phan Tuấn Hải.

    Lên đầu trang Lên đầu trang
    Gốc > THỦ THUẬT MÁY IN >

    Các tính hiệu đèn báo lỗi trên máy in HP K5300

    HP Officejet Pro K5300 and K5400 Printer Series - Blinking Lights Căn cứ vào tín hiệu đèn chớp trên máy để ta có thể biết được tình trạng máy như thế nào và cách khắc phục

    Highslide JS

    Các tính hiệu đèn báo lỗi trên máy in HP K5300

    Highslide JSHP Officejet Pro K5300 and K5400 Printer Series -  Blinking Lights Highslide JS Highslide JS

    Căn cứ vào tín hiệu đèn chớp trên máy để ta có thể biết được tình trạng máy  như thế nào và cách khắc phục :

     1: Đèn Power light and Resume  cùng chớp Highslide JS

    Hệ thống cơ bị kẹt

    Cách trị :



    • Mở nắp máy , kiểm tra và gở bỏ vật lạ bên trong 
    • Press Highslide JSResume button để tiếp tục in
    • nếu vẩn lổi , tắt và mở máy in để tiếp tục.

     2: Dèn Power sáng, Resume chớp Highslide JS

    Máy báo hết giấy in.

    Cách trị

    Nạp giấy và  press Highslide JSResume button.

    3: Đèn Power và  Resume cùng sáng Highslide JS

    một trong các nắp chưa được đóng

    Cách trị

     

    • Phải chắc chắn các nắp đã được đóng khích.
      4: Đèn Power chớp                      Highslide JS
      Máy đang thực hiện lệnh in hoặc máy tạm ngưng để chờ cho khô mực

      5: Đèn Power sáng, 1 trong 2 đèn printhead chớp Highslide JS

      1 trong 2 prinheat không có hoặc bị lổi

      cách trị

       
    •  

    • Nạp lại prinheat mới
    •  

    • kiểm tra printheat bị lổ như sau :
      •  printhead gắn đúng chưa
      • vệ sinh  printhead.
      • Tắt nguồn máy in sau khi lấy printhead ra 
      • Gắn lại printhead và mở nguồn
    •  

    •  Nếu vẩn lổi thì thay mới printhead.
      Figure 6: The Power light and one or more of the printhead lights are blinking Highslide JS Issue

      One or more of the printheads are faulty or need attention.

      Solution

       
    •  

    • Ensure the printhead indicated is properly installed, and then try to print.
    •  

    • If necessary, remove and reinsert the printhead.
    •  

    • If the error persists, replace the printhead indicated. POWER light CONFIGURATION PAGE button/lightCANCEL button RESUME light PRINTHEAD lights INK CARTRIDGE lights On Off Off Off Off Blinking Figure 7: The Power light is on, and one or more of the ink cartridge lights are blinking Highslide JS Issue

      One or more of the ink cartridges are missing.

      Solution

       
    •  

    • Install the ink cartridge indicated, and then try to print. Remove and reinsert the ink cartridge a few times if necessary.
    •  

    • If the error persists, replace the indicated ink cartridge. POWER light CONFIGURATION PAGE button/lightCANCEL button RESUME light PRINTHEAD lights INK CARTRIDGE lights Blinking Off Off Off Off Blinking

      Figure 8: The Power light and one or more of the ink cartridge lights are blinking Highslide JS Issue

      One or more of the ink cartridges are faulty or need attention.

      Solution

       
    •  

    • Ensure the ink cartridge indicated is properly installed, and then try to print. Remove and reinsert the ink cartridge a few times if necessary.
    •  

    • If the error persists, replace the indicated ink cartridge. POWER light CONFIGURATION PAGE button/lightCANCEL button RESUME light PRINTHEAD lights INK CARTRIDGE lights On Off Off Off Off On

       Figure 9: The Power light is on, and one or more of the ink cartridge lights are on Highslide JS Issue

      One or more of the ink cartridges are low on ink.

      Solution

      Get new ink cartridges and replace the existing ink cartridges when they are empty. POWER lightCONFIGURATION PAGE button/light CANCEL button RESUME light PRINTHEAD lights INK CARTRIDGE lights Blinking On Off Off Off On

      Figure 10: The Power light is blinking, and one or more of the ink cartridge lights are on Highslide JS Issue

      An ink cartridge is out of ink.

      Solution

      Replace the indicated ink cartridge. POWER light CONFIGURATION PAGE button/light CANCEL buttonRESUME light PRINTHEAD lights INK CARTRIDGE lights On On On On On On Figure 11: All lights are on Highslide JS Issue

      A non-recoverable error has occurred.

      Solution Disconnect all cables (such as power cord, network cable, and USB cable), wait for 20 seconds, and reconnect the cables. POWER light CONFIGURATION PAGE button/light CANCEL button RESUME lightPRINTHEAD lights INK CARTRIDGE lights Blinking On Off Blinking Off On

      Figure 12: The Power light and the Resume light are blinking, and one or more of the ink cartridge lights are on Highslide JS Issue

      One or more of the ink cartridges have expired.

      Solution

       
    •  

    • Replace the indicated ink cartridge.
    •  

    • If you choose to use the expired ink cartridge, press and hold the Highslide JSPower button, and press the Highslide JSResume button three times. All lights except the Power light go off. Damage to the printer, that results from using this cartridge, is not covered under the warranty. Link light Activity light On Off Highslide JS Issue

      The device is connected to the network but is not receiving or transmitting data over the network. The device is turned on and idle.

      Solution

      No action is required. Link light Activity light On Blinks Highslide JS Issue

      The device is receiving or transmitting data over the network.

      Solution

      No action is required. Link light Activity light On Blinks Highslide JS Issue

      The device is turned off or is not connected to the network.

      Solution

      If the device is turned off, turn on the device. If the device is turned on and a network cable is connected, see Solve network problems in User Guide
    •  
    • Theo kythuatvien 

    Nhắn tin cho tác giả
    Phan Tuấn Hải @ 10:07 06/03/2012
    Số lượt xem: 643
    Số lượt thích: 0 người
     
    Gửi ý kiến